SANWA LCR700

SANWA LCR700

LCR Meters／Handy type LCR meter

Useful for sorting device value

Basic Features 

■Measuring Frequency DC~100kHz
■Ls/Lp/Cs/Cp measurement with sub parameters (D/Q/θ/ESR)
■Automatically selectable L/C/R measurement
■Device Sorting mode
■Optical link USB interface(optional) : LCR-USB
■Data hold, Back ligh

Optional Assesories 

LCR USB cable：LCR-USB
SMD clip lead ：CL-700SMD
AC adapter：AD-30-2

Safety

IEC61010-031

Specifications 

SANWA KS3

SANWA KS3

Detectors／3phase detector

Motor rotation direction testable

Basic Features 

■Phase sequence and open phase checking of three-phase lines
■Rotation direction check by turning three-phase motor shaft manually
■Bright LED indication

Safety 

IEC61010-1, CAT. III 500 V
IEC61557-1,7
IEC61010-2-030, IEC61010-031

Specification 

SANWA KSI

SANWA KSI

Detectors／3phase detector

Basic Features 

■Phase sequence and open phase check
■Large size alligator clips

Safety

IEC61010 CAT. III 600V

Specification 

SANWA KD2

 SANWA KD2

Detectors

Voltage Detector for low voltage

Basic Features 

■Beeping and LED lighting upon detection
■Switchable to measure cord or bare wire


Safety

SANWA STD 5000M

SANWA STD 5000M

Calibrator

Basic Features 

OverView

The STD5000M is a calibrator with soft touch buttons that can generate a desired DC voltage / current, AC voltage / current, resistance, frequency, etc. with a high degree of accuracy and stability.
The STD5000M is with a memory function allowing a broad range of uses for the device.
Ranges
■Voltage(DC·AC) : 0〜1000V(6 ranges)
■Current(DC·AC) : 0〜2000mA(6 ranges)
■Resistance1 : 0〜500kΩ(10Ω steps)
■Resistance2 : 24 steps fixed resistance value(4 kinds 6 ranges) 　　　　
■Hz : 40Hz〜999kHz(5 ranges)

Features

■High accuracy 0.03%(DCV DC mA)
Reliable accuracy is achieved by using the standard voltage IC with a constant-temperature bath for the reference voltage and wire wound resistor and metal film resistor with high tolerance and low temperature coefficient for the resistance element.
■Calibrates 6 types of functions
With the calibration elements of 6 functions(DCV, ACV, DCA, ACA, OHM, Hz) incorporated, it can be used for calibrating and maintaining the DMM, DPM (digital power meter), circuit tester and industrial instruments.
■Installs 90 (6x15) output memories
With 90 (6x15) output memories installed, it is possible to save desired setting.
■User-friendly speedy operability
Use of soft-touch push button switches for operation on the panel(except the power switch). Use of semiconductor switches with greater heat resistance and durability for change switches of the circuit, and latch-type relays requiring less electro motive force.
■With overload protection device
To enhance security, overload protection in case of low voltage and current generation is performed on the semiconductor circuit, and overload protection in case of medium and high voltage generation(50V or more) is achieved by releasing the output terminal and circuit.


Specifications 

SANWA SE 300

SANWA SE 300

Tachometers／Tacho meterTachometers／Tacho meter

Basic Features 

■Designed for ease of holding to enable stable measurement
■Max/Min value hold
■Auto power off (2min.) (cancelable)
■Fixed installation possible using a commercially available camera tripod
■Contact measurement (optional ENC-3)

Optional Assesories 

Reflective sticker (50stickersX2sheets) : SE-T3
Contact measurement attachment : ENC-3
(contact adapter, contact marker and rim speed ring)
contact marker : SE-A30
Rim speed ring : SE-A31

Specification 

SANWA SE - 9000

SANWA SE - 9000

Tachometers／Speedmeter

For elevator maintenance, 2ch display

Basic Features 

■Suitable for elevator speed measurement of high building
■2 independent display
■Analog output terminal to record measuring data
■2 external hold terminals for remote control
■Remote control by external encoder
■Easy to read LED display
■Auto power off
Low battery power alarm

Soecification