R. M. Young Marine Wind Monitor Model 05106

R. M. Young Marine Wind Monitor

Model 05106

 

The Wind Monitor MA is an accurate and reliable wind sensor specifically 

designed for the rigors of the marine environment.


The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a 

pulse signal without electrical contacts or slip rings. The wind direction sensor is a durable 

molded vane. Vane angle is sensed by a precision potentiometer housed in a sealed 


chamber. All materials are carefully selected for corrosion resistance and maximum 

in the harsh marine environment. Stainless steel bearings are used throughout. 

Special waterproof lubricant further enhances reliability. The instrument mounts on 

standard 

1 inch pipe. Separate signal conditioning circuits are available to provide voltage or current 

signals when needed (see below). Each is supplied in a weatherproof junction box with 

mounting hardware.

Specifications


Range:


Wind speed: 0-100 m/s (224 mph)


Azimuth: 360° mechanical, 355° electrical (5° open)


Accuracy:


Wind speed: ± 0.3 m/s (0.6 mph) or 1% of reading


Wind direction: ± 3 degrees



Threshold:* Propeller: 1.1 m/s (2.4 mph) Vane: 1.1 m/s (2.4 mph) 


Signal Output:


Wind speed: magnetically induced AC voltage, 3 pulses per revolution. 1800 rpm (90 Hz) = 

8.8 m/s (19.7 mph)


Azimuth: analog DC voltage from conductive plastic potentiometer − resistance 10K Ω , 

linearity 0.25%, life expectancy − 50 million 

revolutions


Power Requirement:


Potentiometer excitation: 15 VDC maximum


Sensor Cable:


A 3 meter (9.8 ft) pigtail cable is supplied for electrical connections.


For longer cable lengths a user supplied junction box or connector may be used.


Dimensions:


Overall height: 37 cm (14.6 in)


Overall length: 55 cm (21.7 in)


Propeller: 18 cm (7 in) diameter


Mounting: 34 mm (1.34 in) diameter (standard 1 inch pipe)


Weight:


Sensor weight: 1.0 kg (2.2 lbs)


Shipping weight: 2.3 kg (5 lbs)

MODEL 05603C, Wind Sensor Interface (0-5 VDC outputs) 


Power Requirement: 8-24 VDC (5 mA @ 12 VDC)


Operating Temperature: -50 to 60°C


Output Signals: 0-5.00 VDC full scale

MODEL 05631C, Wind Line Driver (4-20 mA outputs)


Power Requirement: 12-30 VDC (40 mA max.)


Operating Temperature: -50 to 60°C


Output Signals: 4-20 mA full scale

R. M. Young Wind Monitor Model 05103

R. M. Young Wind Monitor

Model 05103

 

The Wind Monitor is a high performance wind sensor. Rugged, corrosion-

resistant construction makes it ideal for a wide range of wind measuring 

applications. 

The wind speed sensor is a four blade helicoid propeller. Propeller rotation produces an AC sine wave voltage signal. The wind direction sensor is a rugged yet lightweight vane. Vane angle is sensed by a precision potentiometer. Constructed of UV stabilized plastic with stainless steel and anodized aluminum fittings, the sensor mounts on standard 1 inch pipe. 

Model 05103V offers calibrated 0-5 VDC outputs, 

Model 05103L provides a calibrated 4-20 mA current signal for each channel.

Specifications:

Range:

0-100 m/s (224 mph), 0- 360°

Accuracy:

Wind Speed: ±0.3 m/s (0.6 mph) or 1% of readingWind Direction: ±3 °

Operating Temperature:

-50 to 50°C

Threshold:

Propeller: 1.0 m/s (2.2 mph) 

Vane: 1.1 m/s (2.4 mph) 

Signal Output:

Wind speed: magnetically induced AC voltage, 3 pulses per revolution. 

1800 rpm (90 Hz) = 8.8 m/s (19.7 mph) 

Wind direction: DC voltage from conductive plastic potentiometer − resistance 10K Ω, 

linearity 0.25%, life expectancy − 50 million revolutions

Power Requirement:

Potentiometer excitation: 15 VDC maximum

Dimensions:

37 cm (14.6 in) H x 55 cm (21.7 in) L, Propeller: 18 cm (7 in) dia.

Mounting: 34 mm (1.34 in) dia. (standard 1 inch pipe)

Weight:

1.0 kg (2.2 lbs)

Shipping weight:

2.3 kg (5 lbs) 

MODEL 05103V 0-5 VDC outputs

Power Requirement: 8-24 VDC (5 mA @ 12 VDC)

Output Signals: 0-5.00 VDC full scale 

MODEL 05103L 4-20 mA outputs

Power Requirement: 8-30 VDC (40 mA max.)

Output Signals: 4-20 mA full scale 

 

R. M . Young Ultrasonic Anemometer Voltage and Serial Output Model 81000

R. M . YOUNG Ultrasonic Anemometer

Voltage and Serial Output

Model 81000

The YOUNG Model 81000 Ultrasonic Anemometer is a 3-axis, no-moving-

parts 

wind sensor. It is ideal for applications requiring fast response, high 


resolution and three-dimensional wind measurement.

The sensor features durable corrosion-resistant construction with 3 opposing pairs of ultrasonic transducers supported by stainless steel members. Each 81000 is individually wind-tunnel calibrated. Wind and sonic temperature data is available on four voltage output channels. Serial RS-232 and RS-485 outputs are available as well. The sensor installs on standard 1 inch pipe. 


Specifications


Wind Speed: 0 to 40 m/s (0 to 90 mph)
Resolution: 0.01 m/s
Threshold: 0.01 m/s 
Accuracy: ±1% ±0.05m/s (30 m/s), ±3% (40 m/s)


Wind Direction: 0 to 360 degrees
Elevation Range: ±60 degrees
Resolution: 0.1 degree
Accuracy:
± 2 degrees (30 m/s), ± 5 degrees (40 m/s)


Speed of Sound: 300 to 360 m/s
Resolution: 0.01 m/s
Accuracy: ± 0.1% ± 0.05 m/s (30 m/s)


Sonic Temperature: -50 to +50 ˚C
Resolution: 0.01 m/s
Accuracy: ±2˚C (30 m/s)


Serial Output: User Programmable ASCII, RS-232 or RS-485
1200 to 38400 baud
4 to 32 Hz (user-selected)
Units: m/s, cm/s, mph, knots, km/h


Analog Voltage Outputs:
4 voltage outputs, 0 to 5000 mV


Power Requirement: 12 to 24 VDC, 110 mA
Operating Temperature: -50 to +50 °C
Dimensions:
56cm high x 17cm radius (3 support arms)
Weight: 1.2 kg (2.6 lb)
Shipping Weight: 4.5 kg (10 lb)

R. M. Young Ultrasonic Anemometer Marine Model Model 86106

R. M. Young Ultrasonic Anemometer

Marine Model

Model 86106

Introducing the YOUNG Model 86106 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing applications

The sensor features durable, corrosion-resistant construction with sensitive ultrasonic transducers secured in a streamlined molded frame. The 86106 is fully wind tunnel tested and calibrated to provide accurate wind measurement over a wide operating range. The standard sensor includes many useful output options. Analog voltage outputs are provided for wind speed and wind direction. 4-20 mA current signals are available for each channel and are well suited for long cable runs or for industrial settings where noise immunity is important. A variety of serial output formats are also available. These include ASCII text, RMYT (compatible with YOUNG displays) and NMEA formats. The sensor installs on readily available 1 inch (IPS) pipe. Wiring connections are made in a convenient weatherproof junction box; special mounting adapters, connectors and cables are not required. 


Specifications

Wind Speed: 0 to 75 m/s (0 to 168 mph)Resolution: 0.01 m/sThreshold: <0.01 m/s Accuracy: ± 2% ± 0.1m/s (30 m/s), ± 3% (75 m/s)Response Time: < 0.25 secondsWind Direction: 0 to 360 degreesResolution: 0.1 degreeThreshold: < 0.01 m/sAccuracy: ± 2 degreesResponse Time: < 0.25 secondsSerial Output: RS-232 or RS-485Formats: ASCII, ASCII polled, RMYT, NMEABaud: 1200, 4800, 9600, 38400Units: m/s, MPH, Knots, Km/hrWind Format: Speed & Direction or U & VStatus Indicator: Standard with ASCII & NMEAAnalog Outputs: 0–5000 mV or 4–20 mAAnalog Wind Scale: 0–100 m/sAnalog Direction Scale: 0–360 or 0–540 degreesOutput Update Rate: 0.1 to 10 HzPower Requirement:10 to 30 VDC, <20 mA typical

Environmental:Operating Temperature: -40 to +60 ° CProtection Class: IP65Dimensions: 29cm high x 11cm wideWeight: 0.4 kg (0.9 lb)Shipping Weight: 1.0 kg (2.2 lb)

R. M. Young Ultrasonic Anemometer Heated Model 86004

R. M. Young Ultrasonic Anemometer

Heated

Model 86004

Introducing the YOUNG Model 86004 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing applications. For extended cold weather use, the 86004 features thermostatically controlled heaters in transducer and housing surfaces.

The sensor features durable, corrosion-resistant construction with sensitive ultrasonic transducers secured in a streamlined molded frame. The 86004 is fully wind tunnel tested and calibrated to provide accurate wind measurement over a wide operating range. The standard sensor includes many useful output options. Analog voltage outputs are provided for wind speed and wind direction. 4-20 mA current signals are available for each channel and are well suited for long cable runs or for industrial settings where noise immunity is important. A variety of serial output formats are also available. These include ASCII text, RMYT (compatible with YOUNG displays) and NMEA formats. The sensor installs on readily available 1 inch (IPS) pipe. Wiring connections are made in a convenient weatherproof junction box; special mounting adapters and connectors are not required. The 86004 does require sensor cable 86070 which is ordered to the length desired. 



Specifications
Wind Speed:
0 to 65 m/s (0 to 145 mph)
Resolution: 0.01 m/s
Threshold: <0.01 m/s 
Accuracy: ± 2% ± 0.1m/s (30 m/s), ± 3% (65 m/s)
Response Time: < 0.25 seconds
Wind Direction:
0 to 360 degrees
Resolution: 0.1 degree
Threshold: < 0.01 m/s
Accuracy: ± 2 degrees
Response Time: < 0.25 seconds
Serial Output:
RS-232 or RS-485
Formats: ASCII, ASCII polled, RMYT, NMEA
Baud: 1200, 4800, 9600, 38400
Units: m/s, MPH, Knots, Km/hr
Wind Format: Speed & Direction or U & V
Status Indicator: Standard with ASCII & NMEA
Analog Outputs:
0–5000 mV or 4–20 mA
Analog Wind Scale: 0–100 m/s
Analog Direction Scale: 0–360 or 0–540 degrees
Output Update Rate:
0.1 to 10 Hz
Power Requirement:
24 VDC, 2.5 A
Environmental:
Operating Temperature: -40 to +60 ° C
Protection Class: IP65
Dimensions:
29cm high x 11cm wide
Weight: 0.4 kg (0.9 lb)
Shipping Weight: 1.0 kg (2.2 lb)

R. M . Young Ultrasonic Anemometer Voltage and Serial Outputs 86000

R. M . Young Ultrasonic Anemometer

Voltage and Serial Outputs

86000

 

Introducing the YOUNG Model 86000 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing applications
The sensor features durable, corrosion-resistant construction with sensitive ultrasonic transducers secured in a streamlined molded frame. The 86000 is fully wind tunnel tested and calibrated to provide accurate wind measurement over a wide operating range. The standard sensor includes many useful output options. Analog voltage outputs are provided for wind speed and wind direction. 4-20 mA current signals are available for each channel and are well suited for long cable runs or for industrial settings where noise immunity is important. A variety of serial output formats are also available. These include ASCII text, RMYT (compatible with YOUNG displays) and NMEA formats. The sensor installs on readily available 1 inch (IPS) pipe. Wiring connections are made in a convenient weatherproof junction box; special mounting adapters, connectors and cables are not required. 

Specifications
Wind Speed: 0 to 75 m/s (0 to 168 mph)
Resolution: 0.01 m/s
Threshold: <0.01 m/s 
Accuracy: ± 2% ± 0.1m/s (30 m/s), ± 3% (75 m/s)
Response Time: < 0.25 seconds
Wind Direction: 0 to 360 degrees
Resolution: 0.1 degree
Threshold: < 0.01 m/s
Accuracy: ± 2 degrees
Response Time: < 0.25 seconds
Serial Output: RS-232 or RS-485
Formats: ASCII, ASCII polled, RMYT, NMEA
Baud: 1200, 4800, 9600, 38400
Units: m/s, MPH, Knots, Km/hr
Wind Format: Speed & Direction or U & V
Status Indicator: Standard with ASCII & NMEA
Analog Outputs: 0–5000 mV or 4–20 mA
Analog Wind Scale: 0–100 m/s
Analog Direction Scale: 0–360 or 0–540 degrees
Output Update Rate: 0.1 to 10 Hz
Power Requirement:
10 to 30 VDC, <20 mA typical
Environmental:
Operating Temperature: -40 to +60 ° C
Protection Class: IP65
Dimensions: 29cm high x 11cm wide
Weight: 0.4 kg (0.9 lb)
Shipping Weight: 1.0 kg (2.2 lb

aep SG4 Junction box is used to make weighing, dosing and plants controlling easier, whenever connecting load cells in parallel is necessary, in order to have a single output signal which represents the sum of the signals of connected load cells. Also available ATEX version Product Description  To connect load cells in parallel, five terminal boards with screw-type clamping have been arranged and they are used to perform electrical connections of both input and output cables.The case made of die-cast pressurized aluminium and the fairleads supplied with, ensure a IP65 protection class (EN60529) against dust and water jets.SG4 enables to perform connections in parallel of 4 load cells with 4 or 6 wires systems. ACCESORIES  Pack of No. 3 metal fairleads

AEP TDA

AEP TDA

 The digital transmitter TDA is an instrument designed for the processing of signals from strain gauges in full bridge configuration with 4 or 6 wires and is able to interface with most of the main common field buses such as Modbus RTU, CANopen, DeviceNet and Profibus. For the fieldbus CANopen, Devicenet and Profibus the electronic is galvanically isolated.
Besides the selected fieldbus, it has a RS232 serial interface with a communication program already SUPPLIED (WinTDA), allows a fast tool to control the effectiveness of the performance of the transmitter and allows to implement the calibration procedures.

Outputi: RS232C - RS485 ModBus - CanOpen - DeviceNet - ProfiBus

Product Description 

TDA uses a 24bit converter capable of driving the load cell in a ratiometric way, with a frequency and variable-speed conversion. The compact dimensions make TDA a versatile instrument, suitable for many applications such as industrial weighing, dosing systems, torque measurements etc. Thanks to its characteristics and versatility, simplifies cabling systems and avoids errors due to conversion of analog modules installed on the control station. The noise immunity of the transmission is ensured by the communication standard adopted.
The transmitter has a resolution of ±200.000 divisions, an accuracy of ±0.01% and a conversion speed selectable from 5Hz to 500Hz, so adapting to a variety of application. The operator can perform the calibration by setting the full scale and sensitivity of the used cell or by using a sample weight of known value.
TDA internally manages the transformation in the main unit of measure related.
            LOW COST VERSION

Complete with Software  

      

Accesories

DB9 connector to connect the sensors to the transmitter.

aep TA5F

The transmitter makes simple and cheap the remote transmission of the value sampled from strain gauges load cells, torque transducers, etc.. to PLC, PC, recorders, etc…
The possibility of internally performing the parallel of the load cells simplifies the system wiring because it does not require the use of any junction box. TA5F is available in two versions: with an hermetic case made of die-cast aluminium (IP65 protection class) or in a plastic case for the mounting on a DIN bar (suitable for control panels).
The transmitter has a maxim resolution of ±200.000 divisions, it is ideal for directly connecting the point/site of the measurement to a remote control station, the high conversion speed (up to 300Hz) makes it suitable also for application in real-time.
The transmitter is internally controlled by a microcontroller in Flash technology which first processes the data coming from the ratiometric AD converter and then manages the serial communication.
The transmitter can work as Slave (it transmits the value only on request) or as Master (it transmits the value continuously).

Outputi: RS232C and RS485 Modbus 

Product Description 

Through the serial output it is possible to set the TA5F parameters such as: the Full Scale, the measurement resolution, the filter, the system tare suppression, the input sensibility from 1mV to 3mV, etc..
The serial output is optoinsulated, it can be RS232 or RS485 multipoint (it connects in a net up to 32 units at a distance of 1200m); the choice of the system communication happens through dip-switch.
Thank to the Flash technology are possible software up-grade or software releases also after the acquisition.
On request the transmitter can have the following features :
Case for a 35mm DIN bar.
Modbus RTU protocol.

             LOW COST VERSION

Accesories 

Pack of No. 3 metal fairleads