Hydro - Bios Hand / Motor Winch

with 30 kg Payload

With this new Hand Winch payloads of up to 30 kg can very easily be handled. The twostage gearbox provides direct drive and a 1:3 reduction. Needless to say that the gearbox can be shifted even under load. Additional benefit of the gearbox: When heaving weighty loads with active gear reduction you operate the crank handles ergonomically correct, away from the body.

The electronic counter indicates the length of deployed rope, the remaining rope capacity and the current cable speed. This makes it easy to exactly meet the schedule for a CTD profile or the recommended descent speed of an Integrating Water Sampler IWS. A highcontrast display clearly shows the data even in direct sunlight.

The shift gearbox is embedded into the drum core and is therefore well protected against dust and water. Additionally the core of the drum can accommodate a slip ring device which allows the online use of CTD probes or any other electronic measuring instruments.

The drum capacity of the winch is rated to approx. 300 meters rope of 2.5 mm diameter. Larger diameters of electro-mechanical cables will reduce the yardage accordingly. A ratchet brace avoids accidental unreeling during heaving and a manually operated disc brake cares for a safe deceleration during veering.

The winch can be delivered or retrofitted with an electric motor with speed controller. The motor is simply attached to the winch by means of a bayonet fitting and replaces the hand cranks. The 260 W motor is water protected against heavy seas (IP65) and only needs 12 V DC power supply. A simple automotive battery is the perfect power supply. A feedback from the electronic counter to the speed controller allows the user to preset the rope speed at will.

Winch Variation (see Table below)

Choose an option…  440 100 Hand Winch440 101 Hand Winch440 102 Motor Winch Clear selection

Hydro-Bios No. 440 100 Categories: Misc Instruments, New-Products

FEATURES

• Manual drive with 2 crank handles
• Two-stage gearbox
• 5-way slip ring
• Electronic speed and meter indicator
• Ergonomic
• Electric motor with speed
  controller (optional)

Ordering Information
440 100	Hand winch with outrigger made  from stainless steel (AISI 316), payload 30 kg Manual drive with 2 crank handles,  shift gearbox 1:1 and 1:3 Manual disc brake, manual ratchet brace Electronic cable length and speed indicator Drum capacity approx. 300 meters  rope of 2.5 mm diameter With stainless steel fixing clamp Without rope
440 101	Hand winch with outrigger made from stainless steel (AISI 316), payload 30 kg Manual drive with 2 crank handles, shift gearbox 1:1 and 1:3 Additional 5-pin slip ring device,  protected against heavy seas (IP65) Drum capacity approx. 300 meters of  single conductor cable of 2.5 mm diameter or approx. 150 meters of multi conductor  cable of 5 mm diameter Without rope
440 102	Motor winch with outrigger made from stainless steel (AISI 316), payload 30 kg Additional 5-pin slip ring device, protected against heavy seas (IP65) Electric motor 12 V / 260 W with speed controller,  protected against heavy seas (IP65) Crank handle for manual operation in case of power failure Drum capacity approx. 300 meters of single  conductor cable of 2.5 mm diameteror approx.  150 meters of multi conductor cable of 5 mm diameter Without rope