Hydro - Bios Sediment Trap acc. to Saarso

Cylindrical Sedimentation Vessel

ABOUT

Sediment Traps are containers that allow to quantify sinking particulate matters in aquatic environments. Our tubular design provides a relatively small sampling area but allows suspended matters to settle without the risk of being flushed out even under turbulent environmental conditions (as it happens with large-area conical traps). The Sediment Trap has been designed for autonomous operation in aquatic environments with relatively high vertical particulate flux value. The instrument does not need heavy moorings. Two wide clamps simplify its use in vertical series attached to the same mooring line. Each trap is equipped with a dismountable baffle grid at the opening to reduce turbulences, avoiding wash out of the sediment from the upper part of the cylinder. The water above the collecting bottle can be drained via two cocks. The transparent funnel bottom enables to check for re-suspension of sediment from the collecting bottle after recovery.

Hydro-Bios No. 444 000 | Sediment Traps

Spare Parts

Spare Collecting Bottles

250 ml with screw cap (1 set of 24 pcs.)

Hydro-Bios No. 444 150

TECHNICAL DATA
Opening area	0.015 m²
Cylinder diameter	140 mm
Cylinder length	560 mm
Total length	900 mm
Diameter to length ratio	01:04
Cone angle	40
Grid dimensions	20 x 20 x 40 mm
Mooring line diameter	6 mm
Material	PVC, PE
Weight in air/ water	3 kg /1 kg

ORDERING INFORMATION
Products
444 000	Sediment Trap (Single bottle version)
Spare Parts
444 150	Spare Collecting Bottles 250 ml with screw cap (1 set of 24 pcs.)