KOEHLER K33850 Existent Gum Steam Generator

KOEHLER K33850 Existent Gum Steam Generator

---

Test Method Gum formed during fuel storage can deposit on induction system surfaces, intake valves, stems and guides. To test for gum content, a 50mL sample is evaporated in an aluminum block bath for a specified period under controlled conditions of temperature and flow of air (aviation and motor gasolines) or steam (aircraft turbine fuel). Features and Benefits • For steam-jet method testing of aircraft turbine fuels • Meets output requirements of three-unit and six-unit evaporation baths • Electrically heated for clean, efficient operation and ease of installation • Meets applicable ASME, NEC standards; UL listed, CSA approved

---

K33850 Existent Gum Steam Generator Electrically heated boiler provides instantaneous and reserve steam capacity for steam-jet evaporation tests. Easy to install and operate; electrical heating eliminates the need for on-site fuel combustion. Requires only a water feed source and electrical hook-up. Ruggedly constructed, with long life industrial grade incoloy heating element. Includes a full range of safety features: automatic water level control and low water cut-off; steam safety valve; high-limit pressure cut-out with manual reset; steam pressure gauge. Specifications Output: 54.1 lbs steam/hr. 212°F Bhp Rating: 1.83 kW Rating: 18 Dimensions lxwxh,in.(cm) 20x28x36 (51x71x91) Net Weight: 185 lbs (83kg) Shipping Information Shipping Weight: 200 lbs (91kg) Dimensions: 18 Cu. ft.

---

Ordering Information

Catalog Number Product Description Electrical Requirements K33850/208601 Steam Boiler 208V 60Hz, Single Phase, 87A K33850/208603 Steam Boiler 208V 60Hz, Three Phase, 50A K33850/240601 Steam Boiler 240V 60Hz, Single Phase, 75A K33850/240603 Steam Boiler 240V 60Hz, Three Phase, 43A K33850/380603 Steam Boiler 380V 50/60Hz, Three Phase, 27A K33850/415503 Steam Boiler 415V 50Hz, Three Phase, 25A K33850/480503 Steam Boiler 480V 60Hz, Three Phase, 22A

---

Accessories

Catalog Number Product Description K33810 Steam Superheater Provides dry superheated steam for evaporation baths not equipped with a built-in superheater. Use together with an outside steam source for steam-jet method testing of aircraft turbine fuels. Superheating chamber and condensate trap are constructed entirely of stainless steel. Solid state temperature controller adjusts between 0-550°F. Equipped with steam inlet and outlet connections and condensate drain valve. Steel exterior has a chemical resistant polyurethane enamel finish. Dimensions 5x27x91/2" (13x70x24cm). Shipping Weight: 23 lbs (10.4kg) 220-240V 50/60Hz, Single Phase, 6.8A K33710 Sample Beaker, 100mL spun copper, 50x78mm 332-002-017 Sample Beaker, Pyrex™, 100mL 250-000-03F ASTM 3F Thermometer Range: 20 to 760°F 250-000-03C ASTM 3C Thermometer Range: –5 to +400°C