KOEHLER K8610-1003 Ethanol Purity & Methanol

KOEHLER K8610-1003 Ethanol Purity & Methanol Content by Gas Chromatograph

---

K8610-1003 Ethanol Purity & Methanol Content by Gas Chromatograph • Highly-configurable, low-cost, compact & portable • Ambient-to-400C temperature-programmable column oven • Electronic Pressure Control (EPC) of all GC system gases, including carrier gas • LED "at-a-glance" display of all temp, pressure, & voltage-controlled zones Includes: • Flame Ionization Detector (FID) • Single-channel USB 2.0-compliant data acquisition hardware • PeakSimple data acquisition & control software for WinXP on IBM PC • 6' USB 2.0 Cable (A to B) • GC Accessory Kit • Reusable shipping crate for safe portability • Operation & Service Manuals • Free software updates

Click on the image to view a larger photo of the instrument.

---

Test MethodASTM D5501 covers the determination of the ethanol content of denatured fuel ethanol by Gas Chromatography. Ethanol is determined from 93 to 97 mass % and methanol is determined from 0.1 to 0.6 mass %. ASTM D5501 does identify and quantify methanol but does not purport to identify all individual components that make up the denaturant. This test method provides a method of determining the percentage of ethanol (purity) of the fuel ethanol that is blended into gasoline. Gas Chromatograph The Gas Chromatography 8610 serial chassis can be configured to perform and satisfy all of the requirements of either ASTM D5501 or EN 14110 for Ethanol purity and Methanol content. Analysis takes about 25 minutes and is simple enough for an untrained operator to perform in the lab or in the field. The included PeakSimple Data System displays the calibrated results directly without off-line calculations. Specifications Conforms to the specifications of: ASTM D5501, EN 14110 Dimensions lxwxh,in.(cm) 19 x 14.5 x 12.5 (48.5 x 36.75 x 30.5) Net Weight: 37 lbs (16.8 kg) Shipping InformationShipping Weight: 52.5 lbs (23.9 kg) Dimensions: 4.9 Cu. ft.

---

Ordering Information

Catalog Number Product Description K8610-1003 Gas Chromatograph, 8610C serial chassis, 110V 60Hz K8690-0010 Required Configuration for D5501Flame Ionization Detector (FID) K8690-0034 Heated Split-Splitless Injector Upgrade K8600-WBCX MXT-1 Capillary Column (105M x0.25mm ID, 0.5 DB-1) K8690-0010 Required Configuration for EN 14110Flame Ionization Detector (FID) K8690-0034 Heated Split-Splitless Injection Port Upgrade K8690-0045 Heated Static Headspace Injector Upgrade K8600-WBWB MXT-WAX Capillary Column (30M x 0.53mm ID x 0.5 µ)

	Accessories
	Catalog Number Product Description K8680-0350 Optional Hydrogen Generator K8690-0070 Optional built-in air compressor K8600-C590 Gas Line Installation Kit for Air Cylinder (FID) K8600-C350 Gas Line Installation Kit for Hydrogen Cylinder (FID) K8600-C580 Gas Line Installation Kit for Helium Cylinder (carrier gas)